Inexpensive DIY Batten Wall Using Lattice Strips

[ad_1]

Tutorial: How to use lattice strips as an uncomplicated, affordable choice to put in a Diy batten wall for adding vintage character to simple partitions.

Lattice strips are the MVP of this Do it yourself batten wall project!

I indicate they actually are the unsung hero of a large amount of minimal DIYs and crafts all-around in this article. (Recall that shower curtain artwork we framed with lattice strips a even though again?) This time it required a highlight in the breakfast nook.

A DIY batten wall behind brass vintage sconces above a green banquette bench

Because we type of have an addiction to intricate wall molding all-around here, it’s unquestionably no surprise at all that after we concluded installing and painting our Facebook Market banquette find in the breakfast nook, Robert and I seemed at each and every other and claimed, “Something’s lacking.”

These easy walls required character! And lattice could do the occupation inexpensively. For the reason that molding is just one of my favorite means to make a dwelling glance high-class.

A breakfast nook with olive green banquette, herringbone floors, white walls, and black bifold French door

What is Lattice?

Lattice is made of slender strips of wood most normally made use of in a criss-cross composition for trellises to help climbing crops in gardens or to provide as porch skirting.

But it’s perfect for simple wall molding tasks too. (Type of like Sharpie shiplap but way a lot more legit.)

The value of molding has skyrocketed recently (alongside with every other home enhancement provide), so we figured out a way to include expensive searching batten wall molding for the portion of the cost applying helpful dandy lattice strips at $1.28 per linear foot.

If you have never installed any sort of molding before, it is the ideal newbie edition to test considering the fact that it requires no miter cuts and lattice can sit flush right on top rated of your current baseboards because they’re thinner than typical 1×2 boards.

a stack of lattice strips

How to Make a Batten Wall Making use of Lattice Strips

You could increase this vertical batten wall all all over the space, as wainscoting, or just as a board and batten accent wall. You could go away your walls plain without any wall decor for a minimalist technique or layer it with art for even a lot more character.

It would be great for incorporating on to a basic kitchen island far too. Continue to keep in head even though, if you have a textured wall, the procedure won’t be as straightforward, given that you will want to increase these MDF panels to your textured walls applying Liquid Nails and brad nails initially.

Provides

Measures to Make a Batten Lattice Wall

measuring a wall to place lattice strips for a DIY batten wall

Step 1 – Measure and Come to a decision on a Structure

Evaluate your total wall to start with, come to a decision how considerably apart you want your batten (vertical lattice strips) to be, and mark their placement on the wall with a pencil.

Don’t forget that lattice strips are 1 1/2″ extensive, so issue that into your format plan. We set our battens to have an 8 1/2″ gap among.

Step 2 – Slash Lattice Duration

Evaluate the height of your wall from baseboard to crown and minimize the initial lattice strip to the needed duration with a jigsaw. (Not all partitions will be beautifully the exact same top all the way throughout, so really do not reduce all of your lattice based on that very first measurement.)

checking with a level to make sure lattice strips are perpendicular

Action 3 – Use a Amount to Examine Lattice Placement

“Dry fit” the initial lattice strip and use a stage to make confident it’s correctly straight.

Action 4 – Nail Lattice

As soon as you’re happy with the lattice strip placement, nail it to the wall with the brad nailer (or a hammer).

You can use development adhesive below as well, if you pick out, but because the lattice is so light-weight, it’s completely optional. (The batten wall will also be much easier to eliminate with no adhesive later on if one particular working day you change your head.)

installing lattice strips for wall molding by dry fitting

Stage 5 – Repeat

Repeat Actions 2-4 until you have placed all lattice strips together the wall.

nailing lattice strips to a wall for DIY batten wall molding

Phase 6 – Caulk Cracks and Wooden Fill Nail Holes

Caulk all of the edges of the lattice strips to fill all of the cracks, and fill all of the nail holes with wooden filler.

caulking and wood filling lattice strips

Phase 7 – Sand Wood Filler

When the wood filler is totally dry, sand smooth with fine grit sandpaper (we use an orbital sander to make the system go quicker). Brush away any sanding dust following.

batten wall after caulking, wood filling, and sanding smooth before painting

Stage 8 – Paint

Give almost everything a fresh coat of paint and you’re carried out! (We painted the wall first with the same coloration we planned to use on the lattice strips so that we would not have to function all-around all of the aspects later on.)

batten wall painted white with brass vintage style sconces and green banquette

The Completed Batten Wall

Really don’t you think these two batten partitions add so substantially to this little breakfast nook corner? I like it so a great deal!

We additional these classic design and style sconces to convey a lot more gentle into this windowless room. What do you believe?!

They do the job so nicely with this linear chandelier that provides a contact of modern, and the brass pops against that batten wall we painted Benjamin Moore Chantilly Lace.

breakfast nook with green banquette bench, white batten wall made of lattice strips, and brass lighting

Wrapping Up Breakfast Nook Specifics

I however system to paint the air vent and insert knobs to the banquette cupboard doors.

(Now that it’s dry, I have to admit, don’t adore the paint I experienced to use on the banquette thanks to supply chain difficulties causing my favored cupboard paints to be offered out. But oh very well. If which is our most significant obstacle, I’ll just take it.)

I just acquired the simply call this 7 days that the freshly reupholstered cushions are completed! So it will all be coming alongside one another in right here before long.

These Do-it-yourself herringbone LVP flooring nevertheless glance definitely incredible due to the fact we installed them a several weeks ago! Future on the checklist is creating a desk, refinishing some secondhand dining chairs for the other aspect, and including some classic art and decor finds.

It will be so charming as we wrap up the ultimate facts.

olive green banquette bench in a breakfast nook with white batten, herringbone floors, and black door

Have you ever accomplished a Do-it-yourself batten wall in advance of? Or located a new use for lattice strips? They’re the most effective for so quite a few issues!

More Job Tips Working with Lattice Strips

If you want far more wall molding tips, below are a number of additional much too.

Extra Diy Wall Molding Tips

signoff

[ad_2]

Supply hyperlink

Debbie A. Cunningham

Next Post

Send a Gift to Your Brother: Nine Great Gift Ideas | Ask The Experts

Sun Jun 19 , 2022
[ad_1] If your brother’s birthday is coming up or he’s celebrating a big everyday living milestone, you want to ship a gift that’s significant, valuable, and as special as he is. It can be daunting to locate the ideal reward, so even if you’re buying past-moment, it is not way […]