How to Properly Maintain an Iron Door: A Step-By-Step Guide

Doors are one of the essential parts of any building. As a result, they need to be maintained well to last for as long as possible. There is no point in getting a new door if you don’t properly maintain the one you already have. 

Door maintenance is a crucial part of keeping your home secure and protected. Iron doors are one of the most long-lasting door styles, and with some upkeep, they continue looking great and functioning well.

Door maintenance is a task that may seem unimportant, but it is crucial to the longevity of your door. This guide will teach you how to maintain an iron door so that it lasts for years longer than those made from other materials.

  1. Clean and inspect your door!

The best way to maintain your iron door is to clean and inspect it regularly.

Clean the door using a mild soap and water solution to wipe down the surface. This will remove oil stains and dirt. Clean the door with a dry rag. This will remove any water spots and prevent damage. You should also clean the threshold to keep dirt from getting into your home.

Inspect the entry door for any signs of physical damage. If there is damage, you should have it repaired as soon as possible to avoid injuries.

  1. Lubricate hinges, locks, and latches

One of the most important things you can do to keep your iron door in good shape is to ensure that the hinges, locks, and latches are adequately lubricated.

The most important thing to remember when cleaning your iron door is always to be careful. The bottom of the door can be very sharp, and the tracks on top of the door can also be dangerous. It’s a good idea to wear safety glasses and gloves while cleaning your iron door.

  1. Clean the tracks and rollers

The tracks and rollers of your door are essential to maintaining the quality of the door. Particles can build up in these areas and make it difficult for the door to operate smoothly. Grit and grease can accumulate on the tracks and rollers, which can cause a blockage for the door.

To clean it, remove the door from the frame and use a hose to spray off any dirt or debris. If there is an accumulation of grit or grease, you may need to remove the rollers and clean them by hand. Tracks and rollers can be easily removed by hand. 

You can also use a long screwdriver to remove the tracks from the door frame, which will allow you to clean both the track and rollers at once. To clean the rollers, wipe them down with a cloth or sponge and warm water.

  1. Seal up any cracks or holes

A good way to ensure that your iron door is properly maintained is by sealing up any cracks or holes in the doorway. If there are any gaps where air can flow through, they need to be sealed off because they will allow moisture and dust to get into the iron door.

An iron door can look great on a home, but if it isn’t properly maintained, it will not last as long as it should. 

  1. Make sure your door is balanced properly

A metal hinge supports the door’s weight, and the door is balanced with a heavy counterbalance. If the counterbalance is not in place, the door will swing too far one way or the other.

Counterbalances are fitted with a nylon cord and two screws to allow for fine adjustments to be made. If the door is not balanced correctly, the nylon cord will wear out quickly and eventually break. It is crucial to maintain it well, so it doesn’t become damaged. 

  1. Adjust the door to the correct height

Iron doors do not require much maintenance, but some simple adjustments can keep them in the best shape. An essential step is making sure the door height is correct.

A door that is too short will not provide proper protection to the entryway because it will not close properly. A door that is too high will not be able to provide a sufficient seal, which allows heat and cold to escape and enter inside.

Iron doors Washington are a timeless addition to any home and, when properly cared for, can last for many years. The team of experts at Pinky’s Iron Doors is prepared to help you with your next-door project! Whether you’re looking to install an iron front door or a new iron patio door, they have the experience, expertise, and resources you need!

About the Author

The author of this post is affiliated with Pinky’s Iron Doors and creates customized iron door designs for every home and every budget.